(0) Cart
  • No products in the cart.

LATEST MODS

BlogHome »

Turnigy 9x 3.3v Location

The Turnigy 9x runs internally at 5v. But it also has a 3.3v regulator on the main board that is used to power the LCD. Here are a few of the locations of the 3.3v points that you can use. Make sure whatever unit you’re connecting to that 3.3v regulator doesn’t draw too much current or else you’ll get rebooting of the Turnigy 9x.

Location of the Turnigy 9x 3.3v Rails

1 Comment on Turnigy 9x 3.3v Location