(0) Cart
  • No products in the cart.

LATEST MODS

BlogHome »

Link Guides O-Ring Mod

How many of you are breaking off the link guides like I am prone to doing during hard crashes? I put some 9958 canopy grommets on them and hopefully they reduce the breakage rates. Give it a try and let me know if works out for you.

I use tweezers to open up the o ring so they easily slip over the link guides.

Left: Example of the link guides breaking off on the rotor head. Right: Using tweezers to open up the o ring so it easily go onto the link guides.

Adjust the o ring so they don’t rub against the linkage.

Get the o ring as close to the linkage as possible, but don't allow them to rub.

4 Comments on Link Guides O-Ring Mod

1S LiPo Discharge Curves

I am searching for the best performing 1s LiPo for the money. Here’s the discharge curve for some of the cells I had on hand. Keep in mind that the Hyperion is brand new. The NanoTech are relatively new as well as the 9958’s stock cells. Only the Turnigy 160 has been well used. I am pleasantly surprise to find they still perform pretty well. It hard to see but the Hyperion 160mAh being new, and also has great chemistry, stayed flat at 3.8v until about 172s. Good performance and I can see why it’s one of the most popular 1s LiPo for the micro helis. I am waiting to get some new ThunderPower 160 to put to the test against the Hyperion 160.

I intend on updating this post with better data as soon as I get new cells from each of the manufacturers to test.

This test is to check discharge to 3.8v. Usually I fly my heli to about 3.7v or so.

Categories: Helicopter
Leave a comment →