(0) Cart
  • No products in the cart.

LATEST MODS

BlogHome »

Nano CP X mTDR Canopy

The following is a paper canopy I just folded, based on CyLLiKA’s work.

Paper is a blue cardstock with a nice sheen/texture. Got it on sale from Michael’s craft store for $0.12. Each 12×12 can make at least two canopy.

The core of the paper is the same as the surface. So your cut lines are hidden and looks very finished.

Here are some photos:

Eyes are cut out of vinyl and I tried place over the seam to further strengthen it.

You can see the sheen the paper has. Looks nice and gives enough texture and pop that makes the canopy appear like it’s, well…not made out of paper. :) I shot the flash directly on it to try and get the sheen to show through on the photo.

A close up for the panel lines. The core of the paper being the same color as the surface helps to hide the paper edge. Plus, I modified CyLLiKA’s template so the gluing tabs all comes from the lower panel. This allow the edge of the top panel to always be facing down. Makes for a more clean look on the finish canopy.

A slightly different angle.

Thought up a hidden mount system to allow for no canopy mount holes and also to ensure the canopy clears the servo and servo rods.

A peek at the component of the hidden canopy mount system. Weight penalty of 0.08g per mount piece. Still need field test and crash/durabilities testing done.

And a bonus…

Carbon Fiber pattern printed on semi-gloss photo paper and then cut out, used chisel tip black sharpie to quickly go over the white edge. Then folded and eyes and side decals to finish. Looks pretty nice despite some bad gluing at a couple of spots.

 

 

Categories: Helicopter, ncpx
2 Comments on Nano CP X mTDR Canopy