(0) Cart
  • No products in the cart.

LATEST MODS

BlogHome »

How to use v929 Motor with Blade mQX

Many of you know that the Blade mQX motors are pricey at $15 a pop. For the same price, you can buy four v929 and v949 motor and solder to use with the mQX. It’s a direct fit because the use the same pinion.

Here’s the direct link for two clockwise v929 motors for $7.50.

Here’s two counter-clockwise v929 motors for the same price.

However, for those of you who don’t want to solder, you can easily do the following…

Take the old plug off the bad mQX motor. Remove the shrink wrap. And use that plug as an adapter to connect the new v929 motor to your mQX female connector that runs back to the flight controller board.

Hope that makes sense. Even if you don’t have a bad motor right now. Just order it from Banggood now. So when you do need it, you don’t have to wait the month for it to arrive from overseas.

Categories: mQX, v929
4 Comments on How to use v929 Motor with Blade mQX