(0) Cart
  • No products in the cart.

fs th9x

BlogHome » fs th9x

Turnigy 9x Manuals

Every now and then I see someone on the forum looking for the Turnigy 9x manual. So I compiled a few and am linking them here for your convenience.

First up is the Imax-9x. Which is the same radio as the Turnigy 9x. The manual is fully applicable and has nice soft colorations. Looks good. Click on the logo to download from Box.net:

The Copter X is also a pretty nicely put together manual. Fully applicable to the Turnigy 9x. Click on the Copter X logo to download from Box.net

The Eurgle is a no frills, black and white manual. Good because the PDF is only 6MB in size. It is available in two parts from Hobby King, but I combined both parts into one file to make it convenient for you guys. Click on it’s logo to download from Box.net.

Categories: Turnigy 9x
3 Comments

Turnigy 9x – Xieda 9958 Throttle Curve

I recently purchased a Turnigy 9x and am in the process of setting up my preferred throttle curves for it. So I figure I’d share.

From my understanding, being able to set your throttle curve is the benefit of setting up the initial profile as a “heli” instead of “acro”.

To get to the throttle curve section of the menu, hold down the menu button. Select Settings. Then select THR/CV.

Currently, I have two different throttle curves link to my [Aux 3] F.Mode switch.

Owners of the 9x will know that the F.Mode switch can be toggle between three settings: N, 1, 2 correlating to Norm, ID1, ID2 in the menu.

Initially, I have a normal, more linear throttle curve set for the N switch position:

But I found that I like to fly with the ID1 position. It has the following curve set:

I think I will make the ID1 settings my Normal in the future. My ID2 position currently has a rudder to elevator mix that I am experimenting with. Being able to quickly switch between different settings in mid flight allows you to do a A:B comparison and makes it easier to find the combination of settings that fits your flying style.

I’ll post more as I complete setting up and fine tuning the Turnigy 9x with the Xieda 9958.

Side note: You notice that the stock 9x firmware gives you the ability to adjust 5 different points on the curve. Similar to the Spektrum family of TX. This is one example of where the custom firmware like Er9x shines. They allow 9 points on the throttle curve. For those who need absolute control. Obviously overkill for a micro heli like the 9958…but it’s one example of the power the Turnigy 9x posses with a custom firmware flash to it.

Categories: Helicopter, Xieda 9958
1 Comment