(0) Cart
  • No products in the cart.

er9x

BlogHome » er9x

WL Toys v911 Settings for er9x

Here’s my v911 EEPE file that you can upload to your transmitter running the er9x firmware. It’s a good aid so you can learn and program your own. For instance, I tied the “dual rate” to the knobs. To allow for fine tuning of your rates.

Therefore, for full 100% rate, make sure your AUX.1 knob and AUX.2 knob is turn to the max 100% position.

AUX.1 knob controls the rates for rudder

AUX.2 knob controls the rates for elevator and aileron cyclic

The F.MODE switch at ID0 has a linear throttle curve. In the other modes, ID1 or ID2, it has a more aggressive throttle curve and a more sensitive expo settings: -20 for elevator and aileron.

Download the EEPE file by clicking on the button below. Obviously, this will only work with your Turnigy 9x, FlySky TH9x radio that has already been flashed to the er9x firmware. Use the EEPE program to write this v911 model template to your transmitter.

Categories: Downloads, v911
37 Comments on WL Toys v911 Settings for er9x