Traxxas QR-1 is the Hubsan X4

Comments

6 responses to “Traxxas QR-1 is the Hubsan X4”

1. 

   n3m1s1s

   February 15, 2013

   hack mods right? ok heres one :)

   http://youtu.be/o0-kqvpZ9uU

   Reply
   1. 

      hacksmod

      February 15, 2013

      That’s great NeoBot. We’re all hoping you can share details on what you did. Did you simply wire up the X4 TX to the T9x pots? I know. I violated your one rule. No Questions. :P

      Reply
      1. 

         n3m1s1s

         April 25, 2013

         sorry mate cant answer that as it was a team effort that some wish to remain secret :( but on a better note i modified another fpv build :D

         http://www.youtube.com/watch?v=I8jiyK-xBR8

         that was inspired by the pick of the bare frame with the brown credit card under it? posted here? i thought to myself it would actually be cool if hackmods could of had a quad small enough to ACTUALLY sit on that credit card?

         guess what i did :D then once you guess that you can watch the video and see that not only does it sit on a credit card but it also carries a full fpv setup too ;)

         now thats real

         Reply
2. 

   David

   August 2, 2016

   My Hubsan X4 just does not bind with the transmitter anymore, what can I do? The LEDs just keep blinking.

   This is the exact model: https://www.google.com/search?q=cheerson+cx-10&biw=1914&bih=1012&source=lnms&tbm=isch&sa=X&sqi=2&ved=0ahUKEwjL2d-D2KLOAhXiAcAKHfAmC3EQ_AUIBygC#tbm=isch&q=Hubsan+H107l&imgrc=-xPE5rG1GZKW0M%3A

   Reply
   1. 

      hacksmod

      August 2, 2016

      On other flight boards, I found that if the Crystal is damage…it will prevent binding. I forget what the crystal looks like on the Hubsan… But on other boards, it’s a cylinder. So easier to replace. You may just need a new flight controller board. Probably the easiest method to get flying again.

      Reply
   2. 

      Peter

      August 10, 2016

      It’s also a great idea to double check that the X4 is fully charged, replace the transmitter’s battery with a fresh set, and verify that none of the transmitter’s buttons got stuck. If all else fails just apply for a refund if it’s still under warranty.

      Reply